Type ML180 Munters United Kingdom Sales

Sorption dehumidifier in a compact ready-to-use design with: Galvanised sheet steel housing, painted, including hose connectors Titanium silica gel sorption rotor consisting of abrasion-resistant sorbent with special developed micropore structure and high internal stability, particularly suitable for thermodynamic dehumidification process, can also be used with free water in the airflow and can be cleaned with water, with an external sprocket for the drive Heat recovery sector for partial preheating of the regeneration supply air Rotor seals, abrasion-resistant, for separating the two air flows at the top and bottom Gear motor with belt and timing belt for rotor drive Filter mats, grade G3, in process and regeneration air intake Centrifugal fans for process and regeneration airflow with common Drive motor and sealed internal air flow system Heater, electric, for heating regeneration air Overtemperature safety system (HTCO) with two thermostats automatically or manually resettable Basic control and display panel with signaling lights for NETWORK/OPERATION/FAULT and Regeneration temperature display MAN/AUTO selector switch for optional operation with an external moisture meter Hygrostat socket for easy connection of an external control hygrostat Control system manufactured in accordance with the relevant EC standards and ready for connection wired Rotor material, flame retardant, certified according to DIN 4102-1 (BAM) process air Air volume, freely blowing out: 320 m³/h Nominal air flow: 180 m³/h Pressure, externally available, nominal, pressure approx.: min. 200 Pa Regeneration air Nominal air flow: 67 m³/h Pressure, externally available, nominal, pressure approx.: min. 200 Pa dehumidification performance Inlet state of process air 20°C, 60% r.f.: 32.0 l/24h energy requirement E-connection: 1 x 230V, 50Hz, 2.1 kW Dimensions and weight: height: 910 mm Width: 513 mm Depth: 410 mm Weight: 56 kg Noise level: Maximum noise level without air lines: 75 dB (A)