MASTERPLAT PLUS PGS Robopac United Kingdom Sales

Rotary plate wrapping machine for packaging products with stretch film vertical. The machine can be loaded by the operator with a pallet truck through a special ramp or with the forklift. MACHINE CHARACTERISTICS: Machine body consisting of: The base is built with tubes and electrowelded steel sheet, this allows you to have the rigidity is necessary to withstand the forces that develop with the rotation of the plate. Thanks to perforated tubulars it is possible to lift the machine both in front and in the back. In the structure The seats are obtained for the positioning of the wheels that support the plate. The wheels are covered in acetal material in a fiberglass matrix that ensures a low coefficient of friction during the movement of the table, high stability of the machine, very high resistance to compression and deformation. All this to guarantee the best performance and reduced wear. of the moving parts of the table. The dragging takes place by means of a chain to avoid slippage and ensure absolute consistency in rotation. Technical characteristics: -Number of flat wheels: 28 (14 pairs) -Plate diameter: 1650 mm -Base height (including disc thickness): 77.5 mm -Max. product dimensions: 1200x1000 mm -Max. load capacity: 2000 kg. -Adjustable table rotation speed: 5 x 12 rpm -Adjustable trolley ascent/descent speed: 1.4 x 4.0 m/min' -Forkability: front and rear -Supply voltage: 230 Volt 1 Ph +/- 10% - 50/60 Hz -Total installed power: 1.8 kW -Absorbed current: 5.9A TREE: The steel shaft is built of cold-bent sheet metal and has a composite tubular structure that provides high resistance to torsion and bending, making the shaft more resistant. Inside the shaft is inserted the chain, with high resistance, which transmits the movement of ascent and descent to the trolley, ensuring optimal control of the wrapping. Technical characteristics: Maximum useful height: 2200 mm PGS CART Trolley with pre-stretch motorized with a motor. The PGS pre-stretch trolley has a 250% fixed-ratio motorized pre-stretch with toothed wheels manually interchangeable. The range of pre-stretch values can be extended with gears from 150% - 200% - 300% available as interchangeable options. The force applied to the product is controllable by means of a load cell placed on an idle return roller and the values of film tensioning can be continuously adjusted from the control panel. The PGS trolley is equipped with the Patented “QLS” (Quick Load System) system for the quick insertion of the film between the rollers and the movie unfold button for the release of the film when the film is attached to the product to pack. Technical characteristics usable reel: Max. outer diameter (D): 300 mm Film reel height (h): 500 mm Film thickness: 17-35 micron/m Inner diameter (d): 76 mm Max. weight: 20 kg CONTROL: Completely redesigned control panel, with color graphic display and button multifunction (JOG) for immediate function selection through icons. This new panel allows you to create and store six different programs, all in a simple and immediate way CONTROL PANEL FUNCTION DESCRIPTIONS: FULL ASCENT/DESCENT CYCLE CYCLE ONLY ASCENT AND/OR DESCENT ONLY CLOSED-UP CYCLE MANUAL CYCLE ECHO CYCLE (CYCLE RECORDING) 6 PROGRAMS THAT CAN BE STORED UPHILL MOVIE SHOOTING SHOOTING MOVIE DOWNHILL TROLLEY CLIMB SPEED TROLLEY DESCENT SPEED FLAT ROTATION SPEED HIGH REVOLUTIONS LOW REVOLUTIONS INTERMEDIATE REINFORCEMENT LAPS TROLLEY STOP AT ERGONOMIC HEIGHT MACHINE PHASING MANUAL TROLLEY CLIMBING MANUAL TROLLEY DESCENT MANUAL MANUAL TABLE ROTATION DISPLAY CONTROL: BRIGHTNESS, CONTRAST and REVERSE Standard components: Electric box: ROBOPAC S.p.a. (IP54) Main switch: ABB/BRETER Push-button panel: EATON Proximity sensors: SELET, MICRO DETECTORS, OMRON Photocells: DATALOGIC Electronic card: ROBOPAC Prestyro inverter board: ROBOPAC Operator display: ROBOPAC Micro-switches: PIZZATO Engines: BONFIGLIOLI/BONORA Self-braking motors: BONFIGLIOLI/BONORA