605-219 Fischer United Kingdom Sales

Plug-in measuring probe for determining the electrical conductivity of non-ferrous metals using the eddy current method. Merkmake: - WindowSt CE operating system with large touchscreen display - user interface individually adaptable - Easiest calibration through user guidance - Clear management of measurement tasks through user-definable file and folder structure storage for several thousand measurement tasks with several thousand readings - Individual consideration of the valid material for each material temperature coefficients of electrical conductivity - Measured value acquisition automatically, freewheeling or with external start - Graphical representation of tolerance limits - Comprehensive statistical analysis of measurement series with date and time as well as calculation of Cp, Cpk and histogram display - Manual temperature entry - Temporal temperature change monitoring (? T/? t) - Factory master calibration with 8 standards at 20°C - Audible signal for measured value acquisition and exceeding tolerance limits - Different languages can be set Technical data: - Standard-compliant measurement according to ASTM E 1004 and DIN EN 2004-1 - Different measurement frequencies from 15 kHz to 2 MHz depending on probe - Measurement range: 0.5 - 65 mS/m or 1 - 112% IACS - Measurement accuracy at room temperature: ± 0.5% of reading - lift-off compensation up to 500 μm - Smallest measuring surface diameter without noticeable measurement influence: 13 mm - internal probe or optional external tempera tursensor - USB communication and printer port The scope of delivery includes: carrying case, power supply, Battery set, strap and protective case for meter, Cu reference standard