10101993 Zimm United Kingdom Sales
If you are looking for a reliable supplier where you can purchase the 10101993 industrial product, you are in the right place. RADWARD sells all product groups belonging to the Zimm brand in the United Kingdom market, with fast delivery times and competitive prices.
Technical Specification
10101993
ZE-10-RN KG25x10-RH-H1200-KGF(FG)-GLP
Our design basis for the ZIMM spindle drive below is your
following, known requirement parameters:
Max. lifting load: (total: 2kN)
Max. static load per unit: Tension: 0kN / Compression: 2kN
Max. dynamic load per unit: Tension: 0kN / Compression: 2kN
Max. stroke: 1200 mm (usable stroke)
Installation position: vertical, spindle upwards
Duty cycle: 12.8% (10min) / 10.7% (1h): 20 strokes / h, 24h / day
Lifting speed: 62.5 mm/s at 1500 rpm
Ambient temperature: 20°C
Environmental conditions: calm, dry,
Lifetime calculation: spindle: 43,830 operating hours
Project-related assumptions: guided lifting motion, no lateral forces
We ask you to verify this data again and inform us if changes
are necessary.
ZIMM spindle drive for rotating spindle,
ZE-10-RN, max. 10kN static, i= 4:1
Housing: aluminum, anodized, black,
Seals: NBR
Lubrication: standard grease (also suitable for food industry)
Optileb GR UF 00
Ball screw drive for lifting drive with rotating spindle,
ZE-10-R-KG, KG 25x10, Cdyn = 25.2kN, made of steel, rolled,
Lead accuracy 0.05 mm / 300 mm
Total spindle length Lb = 1602 mm, for lift 1200 mm
Installation dimension Y: 1615 mm (gear side F including GLP)
End processing 1 (spindle side): Ø 15j6 / 20 mm
End processing 2 (gear side): standard EB for R-gears
Lubrication (only KG nut): grease for low temperature and KGT
Tribol GR 4747/220-2 HT
including KG flange nut, D1 / L2 = Ø40 / 55mm, assembled
(flange gear side)
DELIVERED LOOSE:
Counter support plate,
ZE-10-GLP
Customs tariff number: 84834029, country of origin: AUSTRIA
Net weight of the item in kg: 7.9 / piece => 7.9 kg